自動焊接設備是一種高科技設備，稍不小心就可能會造成人員的傷害或者是設備的損害。所以，在設備的使用中要多加注意，使用時需要注意以下危險：

Automatic welding equipment is a high-tech device that can cause personal injury or equipment damage if not taken seriously. So, it is important to pay more attention to the use of the equipment and pay attention to the following hazards when using it:

1.電擊危險：自動焊接設備需要使用高電壓電源，如果操作不當或設備損壞，可能會導致電擊事故。

1. Electric shock hazard: Automatic welding equipment requires the use of a high voltage power supply. Improper operation or equipment damage may lead to electric shock accidents.

2.火災危險：自動焊接設備需要使用高溫火焰進行焊接，如果操作不當或設備損壞，可能會引發火災。

2. Fire hazard: Automatic welding equipment requires the use of high-temperature flames for welding. Improper operation or equipment damage may cause a fire.

3.爆炸危險：自動焊接設備需要使用氣體或液體燃料進行焊接，如果操作不當或設備損壞，可能會引發爆炸事故。

3. Explosion hazard: Automatic welding equipment requires the use of gas or liquid fuel for welding. Improper operation or equipment damage may cause explosion accidents.

4.輻射危險：山東自動焊接設備在焊接過程中會產生紫外線、紅外線、電磁波等輻射，如果長時間暴露在這些輻射下，可能會對人體造成傷害。

4. Radiation hazard: Shandong automatic welding equipment can generate radiation such as ultraviolet, infrared, and electromagnetic waves during the welding process. If exposed to these radiation for a long time, it may cause harm to the human body.

5.化學危險：自動焊接設備在焊接過程中會產生有害氣體和粉塵，如果操作不當或設備損壞，可能會對人體造成危害。

5. Chemical hazard: Automatic welding equipment can produce harmful gases and dust during the welding process. If operated improperly or the equipment is damaged, it may cause harm to human health.

檢查

security check

每次焊接操作通電前，操作員應檢查以下項目：

Before each welding operation is powered on, the operator should check the following items:

1.安裝時確保焊機良好的相互接地可靠。

1. Ensure that the welding machine is well grounded and reliable during installation.

2.確保焊機的輸出線和輸入線完好無損且不外露。

2. Ensure that the output and input wires of the welding machine are intact and not exposed.

3.焊機安裝固定后，應由熟悉行業的人員定期進行檢查(多時間不超過6個月)。

After the welding machine is installed and fixed, regular safety inspections should be conducted by professionals familiar with the industry (no more than 6 months at most).

4.內部不得有松動等異常情況。

4. There should be no looseness or other abnormal situations inside.

為了避免這些危險，使用自動焊接設備時需要嚴格遵守操作規程和操作規范，必要時需要佩戴防護設備，如防護眼鏡、手套、面罩等。同時，需要定期檢查設備的性能，確保設備處于良好的工作狀態。您有需求就來我們網站http://www.fangzh.cn咨詢了解吧！

To avoid these dangers, it is necessary to strictly follow the operating procedures and safety operating regulations when using automatic welding equipment. If necessary, protective equipment such as safety glasses, gloves, masks, etc. should be worn. At the same time, it is necessary to regularly check the safety performance of the equipment to ensure that it is in good working condition. Come to our website if you have any needs http://www.fangzh.cn Consult and understand!